VIKING DIVERS DRESS dry suit

Dry suits and accessories diving suits VIKING

Dry suit VIKING DIVERS DRESS

Brand: Ansell Protective Solutions

Based on Viking HD technology, the Viking DIVERS DRESS is made with a touch of nostalgia for those divers who still dive with traditional helmets such as the Siebe Gorman 12-bolt helmet. It is designed to replace the old canvas coated rubber suits in a style that meets the demands of the 21st…

Product details Dry suit VIKING DIVERS DRESS

The material used is a mixture of natural and synthetic rubbers (NR/EPDM) on a double-sided knitted polyester lining. The total weight of the material is 1550 /- 100 g/m2.

Internal seams: stitched for safety and taped with elastic tape. External seams vulcanized with 25 mm rubber tape. Vulcanization is a chemical bonding process that guarantees waterproof seams.
Reinforcement: additional layers of non-slip structured rubber are used in places where there is a risk of increased wear. The shoulder and zipper area is reinforced. The front of the legs from above the knee to the boot (and around the boot) is also protected against abrasion and punctures.
Each suit comes with the following accessories: braces, bag, instruction manual, repair kit, zipper care material.
EN 14225-2:2005 BIO micro organism approval HZ chemical, CE certificate No. 12090COS03 Rev 1.

This system allows the use of latex or rubber gloves.

	Standard design - VIKING DIVERS DRESS	Alternative design - VIKING DIVERS DRESS
Color	Red with black reinforcements.	All black.
Zipper	There is no zipper on the suit, the entrance is through the shoulders and collar.
Valves	There are no valves, all air functions are controlled through the helmet.
Boots	Standard shoes are part of the suit and are molded with metal reinforcement to provide the necessary shape. Additional layers of textured rubber are used to increase the durability of the shoe. The shoes are not equipped with soles for reasons of use in combination with heavy overshoes.	Neoprene shoes Nitrile safety shoes with metal sole. safety and security PVC shoes - not safety
Neck cuff	The selected rubber collar is first attached to the material of the suit, then it is sewn, glued, or vulcanized. The soft material drip collar is also mounted on the inside of the rubber collar.
Cuffs	HD latex cuffs
Sleeve circles	To achieve complete waterproofing, the suit can be equipped with a rubber ring cuff system with a solid outer rubber ring and a loose inner rigid plastic ring that holds the latex cuff in place.
Glove	This system allows the use of latex or rubber gloves.