Dry suit VIKING HD

Dry suits and accessories diving suits VIKING

Dry suit VIKING HD

Brand: Ansell Protective Solutions

Product details Dry suit VIKING HD

The Viking HD wetsuit is considered the standard in the commercial diving industry worldwide. The highly durable material from which the suit is made is designed to withstand diving in harsh conditions. Whether it is the work of cleaning the hull of ships, welding and inspection or cleaning dirty ship screws. The Viking HD suit can handle these tasks as well as many others. The suit was previously referred to as HD 1500 and for HD.

The material used is a mixture of natural and synthetic rubbers (NR/EPDM) on a double-sided knitted polyester lining. The total weight of the material is 1550 /- 100 g/m2.

Internal seams: stitched for safety and taped with elastic tape. External seams vulcanized with 25 mm rubber tape (vulcanization is a chemical bonding process guaranteeing the waterproofness of the seams).
Reinforcement: Additional layers of non-slip structured rubber are used in places where there is a risk of increased wear. The shoulder and zipper area is reinforced. The front of the legs from above the knee to the boot (and around the boot) is also protected against abrasion and punctures.
Each suit comes with the following accessories: braces, bag, instruction manual, repair kit, zipper care material.
EN 14225-2:2005 BIO micro organism approval HZ chemical approval. CE certificate No. 12104HVS01 Rev 1.

	Standard version – VIKING HD			Alternative design - VIKING HD
Color	Red with black reinforcements.			All black.
Zipper	A 90 cm long magnetic robust zipper is part of all red suits.			The black suits are equipped with a 90 cm long non-magnetic zipper.
Filling valve	A common configuration includes the following valves mounted on rubber reinforced discs. Inflation valve on the chest: an inflation valve protected by Si-Tech Push technology.			Non-magnetic filling valves, Apeks valves.
Hose	Hose equipped with CEJN quick coupling, length 80 cm.			Non-magnetic hoses.
Dump valve	On the left-hand arm: Viking X2 dual exhaust valve for added safety.			Non-magnetic drain valves, Apeks valves.
Boots	The standard boots are part of the suit, finished with a heavy duty rubber sole that is sewn and glued. The sole is made of non-slip material. there is a fin strap holder on the heel.			Nitrile safety PVC shoes with metal. sole and toe PVC shoes - not safety
Neck cuff	Neck cuff Surveyor latex			Latex bottle neck cuff, neoprene neck cuff, quick release collar system that allows quick replacement of a damaged neck cuff.
Balaclava - possible choice	Latex hood Surveyor inner warm liner	Nautic neoprene hood with smooth cheek cuff.	Neoprene hood with smooth rubber on the outside.	Turbo hood in suit-like material with smooth cheek cuff and inner latex hood	Magnum hood made of mater. like a suit with a plain cheek cuff and tie. tape
Cuffs	HD latex cuffs
Sleeve circles	To achieve complete waterproofing, the suit can be equipped with a rubber ring cuff system with a solid outer rubber ring and a loose inner rigid plastic ring that holds the latex cuff in place.			A plastic bayonet glove ring system where a plastic ring is attached to the sleeve and the replaceable cuff is secured in place by this plastic ring.
Glove	Both of these systems allow the use of latex gloves or Viton® butyl gloves/ or nitrile or chloroprene gloves. Latex and rubber gloves are available for mounting on circular rubber cuffs for heavy duty work.