Dry suits and accessories diving suits VIKING
Dry suit VIKING PROTECH
Dry suit VIKING PROTECH
Brand: Ansell Protective Solutions
Viking PROTECH is a flexible dry suit designed for maximum comfort that has a wide range of uses. It is extremely suitable for military use. The suit has a zip at the back. Vulcanized seams allow peace of mind when diving in all situations. Viking PROTECH is easy to clean and repair, helping to…
Product details Dry suit VIKING PROTECH
- Viking PROTECH is a flexible dry suit designed for maximum comfort that has a wide range of uses. It is extremely suitable for military use. The suit has a zip at the back. Vulcanized seams allow peace of mind when diving in all situations. Viking PROTECH is easy to clean and repair, helping to minimize downtime. It is also produced in the PROTECH BE Navy variant.
- Material used: is a mixture of natural and synthetic rubbers (NR/EPDM) on a flexible polyamide/elastane lining. The total weight of the material is 1250 /- 100 g/m2.
- Internal seams: stitched for safety and taped with elastic tape. External seams vulcanized with 25 mm rubber tape (vulcanization is a chemical bonding process guaranteeing the waterproofness of the seams).
- Reinforcement: additional layers of non-slip structured rubber are used in places where there is a risk of increased wear. The shoulder and zipper area is reinforced. The reinforcement of the trousers is located on the seat part and continues from the front of the thighs to the instep of the shoes.
- Each suit comes standard with the following items: braces, bag, instruction manual, repair kit, zipper care material.
- EN 14225-2:2005 BIO micro organism approval, PROTECH BE Navy - EN14225-2:2005 HZ approval BIO micro organism approval.
- CE certificate No. 12106GJS01 Rev 1 (PROTECH), CE certificate No. 12106GJS02 Rev 1 (PROTECH BE Navy).
Standard design | Alternative design | ||||
---|---|---|---|---|---|
Color | All black. | ||||
Zipper | 90 cm long non-magnetic zipper, medium weight zipper. | A non-magnetic robust zipper is part of the PROTECH BE Navy version. | |||
Filling valve | A common configuration includes the following valves mounted on rubber reinforced discs. Inflation valve on chest: Inflation valve protected by Si-Tech Push technology (non-magnetic valve is part of the PROTECH BE Navy version). | Apeks valves. | |||
Hose | The hose is equipped with a CEJN quick coupling, length 80 cm. | Non-magnetic hose for the PROTECH BE Navy version. | |||
Dump valve | On the left arm: Si-Tech low profile adjustable drain valve | Non-magnetic valve for the PROTECH BE Navy version, Apeks valves. | |||
Boots | 5mm neoprene. lined shoes, with non-slip soles, fin strap holder on the heel. |
|
|||
Neck cuff | Surveyor latex neck cuff | Latex cone neck cuff, neoprene neck cuff, quick release collar system that allows quick replacement of a damaged neck cuff. | |||
Balaclava - possible choice |
Latex hood Surveyor inner warm liner. |
Nautic neoprene hood with smooth cheek cuff. |
Neoprene hood with smooth rubber on the outside. |
TURBO hood made of suit-like material with a smooth cheek cuff |
Magnum hood made of mater. like a suit with a plain cheek cuff and tie. tape |
Cuffs | Latex PRO cuffs |
|
|||
Sleeve circles | To achieve complete waterproofing, the suit can be equipped with a rubber ring cuff system with a solid outer rubber ring and a loose inner rigid plastic ring that holds the latex cuff in place. | A plastic bayonet glove ring system where a plastic ring is attached to the sleeve and the replaceable cuff is secured in place by this plastic ring. | |||
Glove | Both systems allow the use of latex gloves or Viton® butyl gloves/ or nitrile or chloroprene gloves. |