Diving Dry Work Trilaminate Suit | Agama WORK

Product details Dry Working Trilaminate Suit Agama WORK

AGAMA WORK dry suit is a waterproof work suit, suitable for work interventions of firefighters, police, air rescuers and water rescue services in harsh climatic and other conditions.

The AGAMA WORK suit is made of trilaminate material from the English company FOTHERGILL POLYCOM.

Material composition: three-layer material with outer corduroy fabric, extremely abrasion resistant, rubber membrane and inner polyester fabric.

Weight: 560-620 g / m2.

Durability: maintaining constant material properties up to -15 ° C.

The construction of the suit consists of: a "telescopic torso", in which the length of the suit adapts to the length of the user's body without restricting his movement.

Suit seams: are sewn and ironed on the underside with a special 28 mm waterproof tape.

Waterproof zipper: located on the front of the suit, covered with a plastic zipper.

The cuffs are latex on the sleeves and neck.

Shoes: boots with steel insole and toe.

Braces: inner rubber braces are part of the suit.

Buckle strap with buckle: fastens the front and rear upper part.

Sizes: 15 standard sizes or customized.

Kevlar applications on the knees against abrasion and bruising (glued and sewn on finished trousers) 920 CZK.

• Abrasion resistant WBM applications on the knees CZK 770

• Abrasion resistant WBM applications for elbows CZK 700
• Abrasion-resistant WBM application for the seating part CZK 890
• Abrasion resistant applications from Cordura to the knees 600 CZK

We perform all service or modifications of this type of suit within 5 days.

Note If the size 44, 45 or 44/45 is embossed on the shoe, it is always the same size.

How to measure all suits - Downloadable table.

Instructions for the treatment of TIZIPU - urgent information:

Due to the fact that there were incorrect instructions for the treatment of TIZIP for products other than diving suits on the Internet, we warn users who have a plastic TIZIP zipper installed in their diving or other suit to pay the following attention to its treatment.

TIZIP must be treated according to the instructions that come with each zipper lubricant.

Never lubricate the zipper along its entire length, but only in the docking area. Apply the lubricant carefully to the surface on the front and back of the lock, as well as inside at the junction of the zip chains.
We recommend treating the zipper, for example, after every third dive, etc. In case of contamination of the teeth, use only soapy water and a soft brush to clean them. Never clean TIZIP with any petrol, toluene or chemical. This procedure will definitely damage the polyurethane layer under the teeth, which will subsequently crack, peel off and break the watertightness of the teeth.

TIZIPU manufacturer's notice: Never use wax or silicone spray, which may contain solvent-based substances, for lubrication.